Согласовали таки со всеми примерно так, у каждого было свое понимание
11.2 For thin-wall pipe, defined as pipe having a wall
thickness of 3 % or less of the outside diameter, the diameter
tolerance of Table 1 is applicable only to the mean of the
extreme (maximum and minimum) outside diameter readings
in any one cross-section.
Здесь надо понимать, что требования Таблиы 1 применимы для "СРЕДНЕГО" диаметра, т.е. Dmean= (Dmax+Dmin)/2
11.2.1 For thin-wall pipe the difference in extreme outside
readings (ovality) in any one cross-section shall not exceed
1.5 % of the specified outside diameter.
Здесь речь идет об овальности, именно разница Dmax-Dmin должна не боле 1.5% номинального диаметра (0.015*Dnom)